Page 1 of 1
Problem with new Sony 1080p LCD
Posted: Mon Nov 20, 2006 7:33 am
by dougcarraway
Just bought a Sony KDL-40V2500 1080p LCD. I love it except for one issue...when I send something black to the TV (or there's no signal), I can see a pattern on the TV. Its not solid black but has some subtle gradations in it, in a wave all the way across the TV. With any signal present you don't notice, until something black appears on screen and it becomes noticeable. Just wondering if this is normal or at least common. I'm guessing not. I'll likely exchange it, but wanted to inquire first.
Thanks,
Doug
Posted: Mon Nov 20, 2006 11:58 am
by Richard
when I send something black to the TV (or there's no signal), I can see a pattern on the TV.
Hmm... what is your:
Connection type
scan rate of the source
HD or SD source
How are you generating this black raster?
Posted: Mon Nov 20, 2006 12:35 pm
by dougcarraway
Hi Richard. Thanks for the reply. I have both component and hdmi sources (DVD and cable box) and therefore a mix of SD/HD. As far as I know it doesn't matter which is selected, its still there. Same for source...I can be looking at the black at the beginning of a SD DVD, a dark HD cable image or no signal at all and its there. Apparently I can have a technician from Best Buy (where I bought it) come out and look at it for free, so I plan to do that. But I was just curious if anyone had ideas.
Thanks,
Doug
Posted: Mon Nov 20, 2006 1:37 pm
by Richard
In case the tech ends up scratching his head over your problem...
Waveform 08 FPD/Digital Display Primer
viewtopic.php?t=5479
Scroll down to the paragraph beginning with...
Regardless of the technology all FPDs have a limited range of operation. While the display will offer contrast and brightness settings...
Also...
101: Brightness and Contrast
viewtopic.php?t=5025
I think what you are seeing is digital scaling noise. With an SD DVD upscaled to 720P or 1080I with everything set right it should be impossible or very difficult to see this at 3 screen heights or more from the display. Same goes for HD DVD and Bluray. With broadcast HD you might still see it but that would be due to the source. SD, digital or analog, is likely to have such noise in your application.
SD - Standard Definition on your HDTV
viewtopic.php?t=4451
Posted: Mon Nov 20, 2006 1:50 pm
by dougcarraway
Thanks, Richard. I'll read through all this shortly. If that's what the issue is, is it normal then? Or might I want to exchange my TV for another and see if I have better luck? Thanks,
Doug
Posted: Tue Nov 21, 2006 5:15 pm
by Tombanjo
You also might want to go to a blue screen (I believe Sony has this feature) and check for any bad pixels.