I lose my conversion EVERY DAY.

----- HDTV Magazine Tips List -----

Make sure you don't adjust the convergence until the set has warmed
up for at least an hour.

It is normal for convergence to drift as things warm up and if you
converge it "cold" it will be off again after a while. Then you
notice that and converge it again, the next time you turn it on you
notice it is off and converge again, etc.

Other factors could be big temperature variations in the room, etc.
but leaving it alone until it has warmed up sufficiently, will
usually counter for that.


On Sep 19, 2005, at 9:31 PM, Hal Turner wrote:

> ----- HDTV Magazine Tips List -----
>
> I have an 4+-year old, lower-priced set: Hitachi 43FDX01B RPTV. For
> a "cheap" TV the picture is
> phenomenal, IMO.
>
> I follow the directions found on Keohi and given to me by a tech
> for how to save the convergence
> settings, so I'm sure that's not my issue.
>
> Every day my set's convergence is out of whack, and it's never the
> same from day to day. This
> happened one time and it went away after a week or so of daily
> fixing. This time it doesn't seem
> to be going away.
>
> Do I need to have something tightened inside the set? I'm long out
> of warranty and am not afraid
> of reaching inside the set to do it myself, but if my problem
> should be fixed professionally, I
> need to know that I should call a tech.
>
> Can anyone suggest a Baltimore-area tech?
>
> Thanks!
> Hal
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> To unsubscribe please click: [email protected]
>
> To receive the digest mode (one email a day made from all posted
> that same day) send an email to:
> [email protected]
>

--
Steve Martin
[email protected]



To unsubscribe please click: [email protected]

To receive the digest mode (one email a day made from all posted that same day) send an email to:
[email protected]