ISF technicians

Started by Jan 16, 2006 2 posts
Read-only archive
#1
----- HDTV Magazine Tips List -----

At 04:46 PM 1/15/2006 -0500, you wrote:
>Dan Liberman...
>
>http://isfforum.com/viewtopic.php?t=90

The problem with that link is that it by no means shows all the ISF
certified technicians that are available. It's much better to visit
the official ISF site here:

http://www.imagingscience.com/isf-trained.cfm

to find ISF technicians/dealers in your area with a variety of skills
and equipment. A good friend, Gregg Loewen of Lion Audio Video, who
has been recommended here before is not on the first site mentioned
but is on the official ISF site. Gregg's domain is the entire East
Coast and actually his company now has ISF certified associates
across the country. Here's his ISF profile, etc.

http://www.imagingscience.com/isf_resul ... status=CAL


-- RAF


To unsubscribe please click: [email protected]

To receive the digest mode (one email a day made from all posted that same day) send an email to:
[email protected]
#2
----- HDTV Magazine Tips List -----

The problem with the ISF website list is finding an active and
independent calibrator. Most dealers only calibrate what they sell.
Another problem is not all those listed are still necessarrily active.
Sadly, one could make a lot of phone calls before finding what they are
looking for. Another problem is the URL you provided today for Gregg
could be someone elses next week by the simple addition of another
calibrator in that state. The ISF Forum was created in alliance with the
ISF and the ISF Forum listings are there to promote active and
independent calibrators plus provide a URL if they need it that remains
the same for their internet marketing. To this day it remains the
largest listing of local independents on the internet!

Gregg is part of the ISF Forum but has yet to put up a listing for his
local area which is not surprising since he is a busy fellow all on his
own. As far as his domain goes that is determined by the nearest airport
anywhere in the country but as friend you would know that. ;)

Being a member of Lion A/V does not make you great and not being a
member does not make you bad. Most here on the TIPS are not part of that
group and I hope you are not inferring their skills are less than.

The ISF forum represents local independent calibrators that are readily
available week by week rather than 2-4 times a year in your area.

If you go through the ISF Forum site you will note that many are very
well known...

Thanks

Richard Fisher
www.HDLibrary.com Published by Tech Services
A division of Mastertech Repair Corporation

Dr Robert A Fowkes wrote:
> ----- HDTV Magazine Tips List -----
>
> At 04:46 PM 1/15/2006 -0500, you wrote:
>
>> Dan Liberman...
>>
>> http://isfforum.com/viewtopic.php?t=90
>
>
> The problem with that link is that it by no means shows all the ISF
> certified technicians that are available. It's much better to visit the
> official ISF site here:
>
> http://www.imagingscience.com/isf-trained.cfm
>
> to find ISF technicians/dealers in your area with a variety of skills
> and equipment. A good friend, Gregg Loewen of Lion Audio Video, who has
> been recommended here before is not on the first site mentioned but is
> on the official ISF site. Gregg's domain is the entire East Coast and
> actually his company now has ISF certified associates across the
> country. Here's his ISF profile, etc.
>
> http://www.imagingscience.com/isf_resul ... status=CAL
>
>
>
> -- RAF
>
> To unsubscribe please click: [email protected]
>
> To receive the digest mode (one email a day made from all posted that
> same day) send an email to:
> [email protected]
>
>


To unsubscribe please click: [email protected]

To receive the digest mode (one email a day made from all posted that same day) send an email to:
[email protected]