----- HDTV Magazine Tips List -----
Sorry Rodolfo,
I didn't mean to misquote you. I remember the conversation well between you
and Hugh on this as I have a similar interest. I would hope for at least a
60" but I will have to go back over your earlier reports to see what the
technological glitch may be that would keep them from getting into the "big
screen" range.
Anthony R.
Orlando, FL
-----Original Message-----
From: HDTV Magazine On Behalf Of
Rodolfo La Maestra
Sent: Thursday, January 12, 2006 1:59 PM
To: HDTV Magazine
Subject: Re: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Anthony,
I am always careful with the way I use words.
I never said they will not on the larger side, even 37" is large enough for
some people, please
carefully read my statement at the bottom of this email, I said:
"It is not assured that SED would produce sets on the size range you want
Hugh.", the last time we
exchanged emails about replacing his set Hugh was looking in the 60-70"
range.
Please look at the CES reports (05 and maybe 04 as well) in the Toshiba
section, I provided a
summary of how the technology works, how fast it is, etc.
Best Regards,
Rodolfo La Maestra
-----Original Message-----
From: HDTV Magazine On Behalf Of
Anthony Rizzuto
Sent: Thursday, January 12, 2006 1:22 PM
To: HDTV Magazine
Subject: Re: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Now I'm commenting on my own posts. The info below was from last years
CEDIA. The comments in this article insinuate that a 50" display would be
on the horizon, given Rodolfo's comments that does not appear to be the
case, at least at this stage. I am curious Rodolfo as to what gave you the
impression that the displays will not be on the larger side? I guess I will
need to wait for your report. I have had high hopes for this technology as
it seemed to be the best solution to replacing CRT RP. I have very little
faith in any of the other current technologies in terms of their ability to
properly reproduce blacks and primary colors. That lack of faith was only
fueled by the earlier discussion on the new Samsung DLPs. It seems that we
are in a catch 22.
Manufacturers hold out the carrot of 1080P but cannot come up with a proper
display to take advantage of it's full capabilities at least at the consumer
level. Watch and wait, is definitely my mantra.
Anthony R.
Orlando, FL
-----Original Message-----
From: HDTV Magazine On Behalf Of
Anthony Rizzuto
Sent: Thursday, January 12, 2006 1:07 PM
To: HDTV Magazine
Subject: Re: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Sorry Rodolfo,
I am at times an impatient person and I know how extremely busy you are so
twice in two days I have answered my own inquiry, for those who may not be
familiar with SED, here goes:
Toshiba Canon SED (Surface-conduction Electron-emitter Display)
TalkBack: Add your opinion
The product: It's not officially a product yet, meaning Toshiba didn't
announce final pricing or availability, but on paper, SED, codeveloped with
camera maker Canon, looks promising. A flat-panel display technology, SED
(Surface-conduction Electron-emitter Display) uses phosphors activated by an
electron emitter, just like standard CRT tube televisions. Supposedly, the
result is tube-level picture quality in a flat form factor. Details were
sketchy, but the first model should be 50 inches in size and have full
1,920x1,080 resolution.
SED technology
50-inch flat-panel HDTV
1,080 resolution
The prospects: First-generation 50-inch SED sets could go on sale as early
as the end of 2005. Prices are sure to be very high at first, a bit higher
than the biggest-screen LCDs (more than $10,000). The stakes are also high;
if the technology catches on, it could well challenge LCD and plasma, which
currently don't quite approach CRT-level image quality.
-----Original Message-----
From: HDTV Magazine On Behalf Of
Anthony Rizzuto
Sent: Thursday, January 12, 2006 12:56 PM
To: HDTV Magazine
Subject: Re: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Rodolfo,
Is SED the technology that was discussed several months ago as a potential
legitimate replacement for CRT RP?
Anthony R.
Orlando, FL
-----Original Message-----
From: HDTV Magazine On Behalf Of
Rodolfo La Maestra
Sent: Wednesday, January 11, 2006 4:55 PM
To: HDTV Magazine
Subject: Re: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Hugh,
I witnessed the SED Canon small display for a few minutes and was of good
quality; the booth still
indicates that SED is in a "technical statement" stage, no $, no specific
dates. I am putting the
rest of the info I researched together to follow up my writings of the 2005
CES about it. It is not
assured that SED would produce sets on the size range you want Hugh.
Best Regards,
Rodolfo La Maestra
-----Original Message-----
From: HDTV Magazine On Behalf Of
Hugh Campbell
Sent: Wednesday, January 11, 2006 4:24 PM
To: HDTV Magazine
Subject: SED by Toshiba and Canon
----- HDTV Magazine Tips List -----
Rodolfo,
Did you see the SED exhibit and if so what are your impressions?
Regards,
Hugh
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same
day) send an email to:
[email protected]
To unsubscribe please click:
[email protected]
To receive the digest mode (one email a day made from all posted that same day) send an email to:
[email protected] 