The FCC adopted the broadcast flag on November 4, 2003, requiring DTV reception devices to limit mass internet redistribution of digital broadcast content by July 1, 2005. The rule does not restrict consumer copying and leaves all existing equipment fully functional.
Originally published at www.ilovehdtv.com/hdtvmagazine/FCCbroadcastflag.htm. View in Wayback Machine →
Broadcast Flag Prevents Mass Internet Distribution; Consumer Copying Not Affected;
�No New Equipment Needed
�����������
����������� Today�s rules are targeted only at
products that are capable of receiving DTV signals over-the-air. These products
must comply with the broadcast flag requirements by
����������� In
a Report and Order adopted today, the
FCC permits use of the flag at the discretion of the broadcaster. The FCC said that the current lack of
digital broadcast content protection could be a key impediment to the DTV
transition�s progress. The absence of such content protection could cause high
value programming to migrate from broadcast television to more secure platforms
such as cable and satellite TV service. Reduced availability of high value
content on broadcast television could harm the viability of free over-the-air
television and slow the DTV transition. The FCC declined to prohibit the use of
the flag with regard to certain types of programming, such as news or public
affairs.�
����������� To
facilitate adoption of broadcast flag technology in television receivers and
related equipment by 2005, the FCC established an interim policy that allows
proponents of a particular content protection or recording technology to
certify to the FCC that such technology is an appropriate tool to give effect
to the broadcast flag, subject to public notice and objection. The FCC�s
interim certification decisions will be guided by a series of objective
criteria aimed at promoting innovation in content protection technology.
����������� The FCC also adopted a Further Notice of Proposed Rulemaking (FNPRM) seeking comment on a permanent objective process for the approval of digital recording and output content protection technologies that will foster innovation and marketplace competition.
����������� A summary of the key issues is
attached.
Action
by the Commission,
�
�����������������������������������������������
FCC ADOPTS ANTI-PIRACY
PROTECTIONS FOR DIGITAL TV
Summary of Key Issues
What is the
Broadcast Flag?
�
The �broadcast flag� is a digital code that can
be embedded into a digital broadcasting stream. It signals DTV reception
equipment to limit the indiscriminate redistribution of digital broadcast
content.�
�
The
broadcast flag will benefit consumers by ensuring continued access to high
value programming content on free, over-the-air TV.
�
The broadcast flag protects consumers� use and enjoyment of broadcast
video programming.� The flag does not
restrict copying in any way.
What
types of programming are affected?
�
The FCC allowed broadcasters to decide whether or not to include the flag with
specific types of programming.
�
The FCC declined to prohibit
the use of the flag with regard to certain types of programming, such as news
or public affairs.
What
types of equipment are affected?
�
All
existing equipment in use by consumers today will remain fully functional.� Thus, consumers can continue to use existing
equipment without purchasing new or additional equipment to receive and view
broadcast television signals.
�
The
new rule requires that DTV reception devices containing demodulators recognize and
give effect to the broadcast flag pursuant to certain compliance and robustness
rules.�
�
�Compliance�
refers to what the covered demodulator can do with the broadcast content.� If the flag is present, the content can be
sent in one of several permissible ways, including (1) over an
analog output, e.g. to existing analog equipment; or (2) over a digital output
associated with an approved content protection or recording technology (this
list of approved technologies is often referred to as �Table A�).�
�
�Robustness� refers to the ability to �hack� the
system.� The FCC adopted an �ordinary
user� robustness standard that will afford consumer electronics, IT and PC
manufacturers the maximum flexibility in innovation while ensuring adequate
content security.� �
How
does the broadcast flag affect cable TV and satellite TV operators (i.e. MVPDs)?
� The FCC determined that multichannel video programming distributors (MVPDs), such as cable and satellite TV operators, should have the latitude to implement the flag as appropriate for their distribution platforms, whether it be through direct pass-through or by effectuating the flag�s intent through their own conditional access system.�
� The FCC said that MVPDs may not assert greater redistribution control protection for digital broadcast content than that which the broadcaster has selected.� In the case of content which a broadcaster has not marked with the flag, MVPDs must deliver that content to subscribers in a manner that reflects and gives effect to its unflagged status.
� The FCC is seeking further comment on whether cable operators that retransmit DTV broadcasts may encrypt the digital basic tier in order to convey the presence of the flag through their conditional access system.
What
is the interim policy for approving digital content protection and recording
technologies?
� The FCC established an interim policy allowing proponents of a particular content protection or recording technology to certify to the FCC that such technology is an appropriate tool to give effect to the broadcast flag, subject to public notice and objection.
� This interim policy will enable the FCC to certify multiple compliant technologies in time for manufacturers to include flag technology in television receivers by 2005.
� Under this interim process, proponents must submit to the FCC the following information:
1. a description of how the technology works, including its scope of redistribution;
2. the level of protection the technology affords content;
3. whether content owners, broadcasters, or equipment manufacturers have approved the technology for use; and
4. if the technology is to be offered publicly, a copy of its licensing terms.�
� Upon review of the initial submission, the FCC will issue a public notice. If no objection is received within 20 days, the FCC will expeditiously issue a decision on the approval of the submission.� If substantive objections are raised within 20 days, the proponent of the technology can issue a response within 10 days.� The FCC will then make a decision as expeditiously as possible and expects such decision to be made no later than 90 days from the reply filing.
� The FCC said it expects any approved technologies that are publicly offered to be licensed on a reasonable and nondiscriminatory basis. The FCC also encouraged the development of multiple technologies, such as digital rights management, software-based, and non-encryption alternatives that will promote consumer uses and access to content.
What is the
permanent process for approving content protection and recording technologies?
� The FCC determined that additional public comment is needed in order to formulate a permanent open, objective process for the approval of digital recording and output content protection technologies that will foster innovation and marketplace competition.� The FCC initiated a Further Notice of Proposed Rulemaking to examine this issue in greater detail.
�
