I
Service Default Settings for LG 30FZ4D
Read-only archive
I have the same problem with area's blotching, etc. I even had LG come out and replace the digital card in the TV and have the same problem. Then I called Dishnetwork to come out they looked at it and said its normal and left. I know it didn't look like that in the store.
I can give you my settings but they prob. aren't any good.
If you find anything out let me know.
Thanks
I can give you my settings but they prob. aren't any good.
If you find anything out let me know.
Thanks
Can you email me the settings? .. Thanks again!
Raster/Center, H/V_Size
V-Position =25
V-Size =27
H-Position =23
H-Size =23
UP-VLIN =1
LO-VLIN =1
Pin Amp =17
Pin Phase =31
Up-CPin =38
Lo-CPin =40
AFC-Bow =31
AFC-Angle =32
White-Balance
R-DRIVE =40
G-DRIVE =31
B-DRIVE =41
R-CUT =34
G-CUT =31
B-CUT =31
Sub-Bright
SUB_Bright =15
Sub-Tint/Color
SUB_TINT =14
SUB_COLOR =5
VPX3226
Contrast(m) =0
Contrast(s) =0
V-Position =25
V-Size =27
H-Position =23
H-Size =23
UP-VLIN =1
LO-VLIN =1
Pin Amp =17
Pin Phase =31
Up-CPin =38
Lo-CPin =40
AFC-Bow =31
AFC-Angle =32
White-Balance
R-DRIVE =40
G-DRIVE =31
B-DRIVE =41
R-CUT =34
G-CUT =31
B-CUT =31
Sub-Bright
SUB_Bright =15
Sub-Tint/Color
SUB_TINT =14
SUB_COLOR =5
VPX3226
Contrast(m) =0
Contrast(s) =0
Thank You!